L52323 Performance of Dirty or Worn Flow Conditioners

L52323 Performance of Dirty or Worn Flow Conditioners

Measurement, flow conditioning

digital signal processing

A large portion of current natural gas metering technology requires a fully-developed velocity profile for accurate flow measurement results. Two methods can be used to obtain a fully-developed velocity profile in natural gas pipelines: long lengths of straight pipe, or shorter pipe lengths in combination with a flow conditioner. Due to size limitations, long lengths of straight pipe are not always practical and flow conditioners may be the only viable option. Flow conditioners that are based on a distributed pattern of holes through a plate are commonly used in the natural gas industry and are referred to as "perforated plate" flow conditioners. The ability of a perforated plate flow conditioner to redistribute a disturbed velocity profile is based on multiple geometric characteristics of the plate (e.g., hole pattern, porosity, and plate thickness) and on the hole details (e.g., edge sharpness). Exposure of perforated plate flow conditioners to conditions in natural gas pipelines could result in changes to the geometric characteristics of the flow conditioner due to dirt buildup on the flow conditioner face or wear of the edge sharpness. This effort evaluatesd the ability of dirty or worn plate flow conditioners to effectively redistribute a disturbed velocity profile.

Grimley, Hawley

Reports

Southwest Research Institute

6/23/2016

7/29/2020

Publicly available for $250.00

MEAS

Project - Final Report

L52323